Customized fruits/meats/clothes dehydrator/dryer machine fruits
Description of dryer machine fruits:
It is widely used for the heating and dehumidification of raw materials and product in
pharmaceutical,chemical, foodstuff, light and heavy industries.especially for the fruit and
vegetable food processing.such as leaf vegetables, cabbage,onions,carrot, apples,lemons,orange,
Principle of dryer machine fruits:
This drying machine use of heat pump evaporator absorbs heat from the outside air.or recycling of exhaust gas residual heat in the process of drying.Through the work of compressor, the energy transport (transfer) to drying box, drying box of hot air after repeated cyclic heating, absorb the moisture in the material, its cooling humidification, through hot air platoon is wet or the process of condensation, water take the moisture out of the material, and finally realizes the continuous drying of materials.
Application of dryer machine fruits:
The heat pump can be used in many application,like agriculture,industry,seafood,grain,herbs,construction,paper products,seasoning,mineral industry,etc
Dry vegetables like Radish, lettuce, pumpkin, carrots, spinach, cassava,etc
Dry fruits like Apple, lemon, mango slices, dried longan, dried longan,etc
Dry meat: Sausage, beef, duck, ham,etc
Others it can dry noodle/ wooden /stick incense/herbs /floers ect.
Features of dryer machine fruits:
1.The entire machine and baking tray made of stainless steel.
2.Most of hot air inside the loop, high thermal efficiency, energy conservation.
3.The use of forced ventilation in the box high and adjustable air board, dry materials evenly.
4.Source may be steam, hot water, electricity, gas, coal, a wide choice. Machine noise, running
5.With a temperature-controlled device, easy installation and maintenance. Wide range of
applications can be drying various materials and is a versatile drying equipment.
6.Temperature range from room temperature to 140 degrees Celsius, the temperature is too low
when ordering Remarks.
Working principle of dryer machine fruits:
Use hot air circulation blower to dry the material , Fan wheel rotates, the outside air into the
oven,After heater, hot air is formed,Then enter the working chamber through the air distribution
plate gap , A lot of hot air inside the circulating flow, Continue to enter new air inlet supplement.
After the recycled exhaust moisture from the exhaust port.Whole cycle, so that the material is
heated uniformly, and the purpose of drying.
Technical Parameters of dryer machine fruits:
Advantage of dryer machine fruits:
1, Energy saving
Adopt heat pump technology, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
2, Exact control temperature and humidity
The drying temperature can be easily controlled by PLC +Touch Screen control system.
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
4, The temperature: 10-75°C, Max 75°C, similar nature drying.
5, The baking plate dimensions and materials can customize as customer request.
6, Good drying quality.
During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Stable operation without being influenced by weather.
Act as a good advisor and assistant of clients; enable them to get rich and competitive
from the returns of their investment.
1) Select suitable equipment model.
2) Design and manufacture products according to clients’ special requirements.
3) Train technical personnel for clients.
4) Professional suggestion for customer.
Services during the sale:
Respect clients; devote ourselves to improving the total value of clients.
1)take photos(including raw material, semi-products, final products, and loading products)
1) Pre-check and accept products ahead of delivery.
2) Prepare all clearance documents, so that the customer clearance smoothly.
Provide considerate services to minimize clients’ worries.
1) Provide civil engineering drawings of the equipment.
2) Free training(including installation,maintenace) to every customer.
3) Install and debug the equipment, ensure the dryer running smoothly.
4) Examine the equipment regularly.
5) Take initiative to eliminate the troubles rapidly at site.
6) Distribute the guarantee fittings door-to-door.
7) Provide technical exchange and support.
8) Provide maintenance for big items.
9) The most preferential prices to provide customers the quick-wear parts.